Surface must be clean and dust free; remove all dirt (dust, wax etc.)
Waterborne products are tend to raise the fiber of the woods. To minimize fiber rising substrate has to be sanded with 150-180 grit
paper. The humidity level of t he wood must be 12-14 %.

Mix well before use. 4 hours after first coat surface is sanded with 220 grit paper. If the time interval between second and third coat is
less than 4 hour, there is no need to sand. In order to stain the wood use water insoluble stains. At low temperatures and/or high relative
humidity drying time get longer. Thus, drying must be carried out in areas with good air ventilation.

• Brush
• Roller